ALD brass plated nickel 0.3mm 0.4mm high/low pressure micro fine cooling system spray mist nozzle
Spray Characteristics
● Removable & cleanable design
● Thread size: 3/16unc, 10/24unc, 12/24unc
● Orifice size: 0.1mm, 0.15mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm
● High pressure or low pressure
● Removable & cleanable design
● Thread size: 3/16unc, 10/24unc, 12/24unc
● Orifice size: 0.1mm, 0.15mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm
● High pressure or low pressure
Product feature:
• Removable & cleanable design;
• Thread Size: 3/16unc, 10/24unc, 12/24unc;
• SS orifice Size: 0.1mm, 0.15mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm;
• Water Drop Size: 15 micron---70 micron;
• With Anti-drop device inside Nozzle;
• Working pressure could be high pressure or low pressure;
• Without airs supplementary, system device is simple;
• Energy and water saving, low cost and good effects;
• Nozzle tip uses wear-resistant materials, and service life is 2.5 times of similar nozzle.
• SS orifice Size: 0.1mm, 0.15mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm;
• Water Drop Size: 15 micron---70 micron;
• With Anti-drop device inside Nozzle;
• Working pressure could be high pressure or low pressure;
• Without airs supplementary, system device is simple;
• Energy and water saving, low cost and good effects;
• Nozzle tip uses wear-resistant materials, and service life is 2.5 times of similar nozzle.
Applications:
1. Wetting and rust removal
2. Air humidification, chemical treatment
3. Chemical spraying
4. Liquid spraying
5. Tobacco leaf humidification, tablet coating
6. Flue gas evaporative cooling
7. Component cooling
8. Fruit spray wax
9. Glazing of tiles
10. Plant humidification
11. Salt spray test
12. Artificial fog
Certifications
