ABS plastic Cooling tower white sprinkler water distributor three splash flower basket hollow cone spray jet nozzle

Product feature:

● Thread size have 1/2", 3/4", 1", 1-1/4", 1-1/2", 2" Male;
● Spray pattern: Hollow cone;
● Material: ABS Plastic;
● Advantage: Anti clogging and acid and alkali resistance;
● Produce hollow cone spray, the spray area is circular, the spray angle is 120°;
● Unlimited internal circulation channel and could produce uniform distribution under the high-pressure & large flow rate,easy to control the spraying flow, the blade design;
● Not easy to block • Low pressure atomization • High strength • Durable
●ICommonly used in square towers and circular countercurrent towers;
● Operating pressures from 20 to 145 psi (1.5 to 10 bar).

Outstanding advantages:
1. Uniform water distribution and large pressure adaptation range;
2. The designed locking and anti-loosening device can make it firmly connected with the water distribution pipe and not fall off, which can ensure the long-term safe operation of the water distribution system;
3. High impact resistance, high heat resistance, excellent wear resistance, good dimensional stability;
4. Easy and quick installation or replacement, high work efficiency;
5. Reliable quality, moderate price, sufficient inventory and timely delivery;
6. Can be customized according to customer needs.

The cooling tower spray nozzle is composed of the nozzle shell, the inner core section, the mixing section, and the flange, and is the main part of the cooling tower. Cooling tower sprinklers have many advantages: corrosion resistance, beautiful surface, variety, high strength, long service life, easy cleaning, acid resistance, and so on. It runs stably, with low mechanical noise, no flying water or floating water, and has little impact on the surrounding environment.

The principle and performance of cooling tower nozzle:

The working principle of the cooling tower nozzle: The automatic rotary atomizing cooling tower achieves the purpose of reducing the water temperature by taking away the latent heat of vaporization through the heat conduction between the circulating cooling water and the cold and dry air and the evaporation of the circulating cooling water. The cooling tower nozzle has a certain pressure of circulating cooling water to enter the cooling tower through the water inlet pipe. Under the action of the swirling jet of the atomizer, the atomized mist with a diameter of 0.1mm is sprayed towards the top of the tower. The reverse thrust drives the automatic rotating device to rotate, causing the atomized water to fill the entire tower body.

The main material properties of the cooling tower sprinkler head: the pressure water enters the spiral cooling tower sprinkler horizontally along the tangential direction, rotates in the cavity and makes a downward swirling motion, and is ejected from the nozzle below. After the water is sprayed, an umbrella-shaped rotating water body is formed, which impacts the water splash bars and the water splash blades, and is scattered into evenly distributed mist-like fine water droplets, which fall to the top surface of the packing. Good heat dissipation effect, especially suitable for cooling water.

High strength, large pressure adaptation range,
Not easy to block. Low spray height, uniform water distribution and good splashing effect
Easy installation and maintenance, water volume can be adjusted, good heat dissipation effect,
Especially suitable for cooling and cooling.

Applicable fields: all kinds of evaporative condensers, cooling towers, etc.